PROFILE OF PROFESSIONAL ENGINEERING STUDY PROGRAM of Widya Mandala Catholic University of Surabaya

Background of Establishment: The sustainability of a country’s development requires the adequacy of a number of qualified professional engineers. To realize the availability of qualified professional engineers, the Indonesian government has enacted Law No. 11 of 2014 concerning the profession of Engineers. To implement the Law No. 11 of 2014, the Ministry of Research Technology and Higher Education has trusted the Widya Mandala Surabaya Foundation which houses Widya Mandala Catholic University of Surabaya (WMCUS) as one of the recipients of the mandate to administer the Professional Engineer Study Program as outlined in the Letter of the Director General Institutional, Technological Science and Higher Education number 678 / C.C4 / KL / 2016, dated 11 April 2016, concerning the assignment of implementing the Professional Engineer Study Program at Widya Mandala Catholic University Surabaya. The letter was then followed up by the Decree of the Minister of Research, Technology and Higher Education of the Republic of Indonesia number 594 / KPT / I / 2017 dated October 23, 2017 concerning the Opening Permit for the Professional Engineer Study Program at Widya Mandala Catholic University, Surabaya.

The Indonesian Government’s mandate was welcomed with full responsibility by the Widya Mandala Foundation in Surabaya and WMCUS. This is in accordance with the vision, mission and values of UKWMS, namely caring, committed and enthusiastic. For this reason, the Widya Mandala Surabaya Foundation established the implementation of the Professional Engineer Study Program at WMCUS under the auspices of the Faculty of Engineering, and was inaugurated on Saturday, April 28, 2018 at the Pakuwon City UKWMS campus.

Vision:

Being a superior, open, and professional engineering study program that is based on Pancasila and Catholic principles.

Mission:

  1. Carrying out engineering education program that has high quality, superior, and relevant to development needs.
  2. Developing sustainable cooperation with the business sector and the electronics, chemical, manufacturing/service, and food industries, as partners in engineering work practices.

Educational Objectives :

To produce engineers who:

  1. have engineering professional ethics
  2. skilled in engineering work
  3. competent in engineering planning and design
  4. competent in the management and communication of engineering work
  5. competent in engineering education and training in the fields of electrical, chemical, industrial systems, or food.
  6. competent in research, development and commercialization of electro-based products, chemicals, industrial systems, or food.
  7. competent in the field of consultancy, or construction/installation work related to electrical, chemical, industrial systems, or food.
  8. competent in the field of production of electrical products, chemicals, industrial systems, or food
  9. competent in the case of electrical, chemical, industrial, or industrial materials, materials and components
  10. competent in business management and marketing of electrical products, chemicals, industrial systems, or food

Organization: The Professional Engineer Study Program is one of the study programs under the auspices of the Widya Mandala Catholic University of Surabaya’s Faculty of Engineering. The organizational personnel are as follows:

Leaders of the Faculty:

Dean                   : Ir. Suryadi Ismadji, M.T.,Ph.D, IPM

Vice Dean I     : Felycia Edy Soetaredjo, ST., M.Phil., Ph.D, IPM

Vice Dean II   : Wenny Irawaty, S.T., M.T., Ph.D., IPM

Leaders of the Study Program:

Head of Study Program                              : Ir. Rasional Sitepu, M.Eng., IPM

Coordinator of Electronic Vocational      : Andrew Joewono, S.T,. M.T., IPM

Coordinator of Chemical Vocational        : Dr.  Ir. Suratno Lourentius, M.S, IPM

Coordinator of Industrial Vocational       : Ir. Hadi Santoso, MM, IPM

Coordinator of Agricultural Vocational   : Ir. Theresia Endang Widoeri Widyastuti, MP, IPM

Full-time Lecturers :

    1. Rasional Sitepu, M.Eng., IPM
    2. Andrew Joewono, S.T,. M.T, IPM
    3. Ir. Suratno Lourentius, M.S, IPM
    4. Ir. Hadi Santoso, MM, IPM.
    5. Ir. Tarsisius Dwi Wibawa Budianta, MT., IPM
    6. Indah Kuswardani, MP, IPM

Part-time Lecturers :

1.       Albert Gunadhi, ST., MT., IPM.
2.       Hartono Pranjoto, Ph.D., IPM.
3.       Aning Ayucitra, ST., M.Eng.Sc., IPM.
4.       Ir. Suryadi Ismadji, MT., Ph.D., IPM.
5.       Wenny Irawaty , ST., MT., Ph.D., IPM.
6.       Ery Susiany Retnoningtyas, ST., MT., IPM.
7.       Felycia Edi Soetaredjo, Ph.D., IPM.
8.       Sandy Budi Hartono , ST., M.Phil., Ph.D., IPM.
9.       Dian Retno Sari Dewi P., ST., MT., IPM.
10.   Julius Mulyono, ST., MT., IPM.
11.   Martinus Edy Sianto, ST., MT., IPM.
12.   Ignatius Jaka Mulyana, STP., MT., IPM.
13.   Ir. Thomas Indarto Putut Suseno, MP., IPM.
14.   Ir. Adrianus Rulianto Utomo , MP., IPM.

Educational Supporting Staff:

Head of Administration : Heribertus Bambang Triharyono, SE.

Administrative Executors :

1. Veronika Desi Adriarni, S.Sos

2.Drs. Muliady Tanudjaja

3. Florentina Titi Setiawati

Laboratory Assistants :

1.Aloysius Novi Triono

2.Michael Hadi Pudjo Kuncoro

3.Agustinus Soelistiawan

Curriculum: The study load of the Engineer Professional Program Study Program (PPI) is 24 credits. Education duration is for one year or two semesters. As much as 70% of the study load are field activities. Durasi pendidikan selama satu tahun atau dua semester. The list of courses is as follows:

Semester  1:

Course Subject Code
Course Subject Name
Credit hours
PPI100 Code of ethics and the ethics of professional engineers 2
PPI101 Professionalism 2
PPI102 Safety, Health, Work and Environment Safety 2
PPI103 Case Study 4
PPI104 Speaker at a Seminar. Workshop, Discussion Group 4
Total of credit hours 12

Semester 2:

Course Subject Code
Course Subject Name
Credit hours
PPI150 Engineering Practice 12

Graduation:

  1. The graduation requirement is that students have completed all the courses and the administration requirements that have been determined,
  2. Students who have graduated are entitled to the title of Engineer (Ir. in Bahasa Indonesia) in which case the title Ir. can be put in front of the first name.
  3. Ready to take competency test to obtain Professional Engineer Competency Certificate and Engineer Registration Certificate (Surat Tanda Registrasi Insinyur/STRI).

Student Admission Path : #Terms and Conditions for Path 1 :

  • Graduated from a Bachelor Program in Electrical Engineering, Chemical Engineering, Industrial Engineering, Food Technology/Agricultural Product Technology/Agricultural Industry Technology, with a minimum of program accreditation level of B,
  • Have work experience in the appropriate engineering field (Electrical Engineering, Chemical Engineering, Industrial Engineering), Agricultural Technology (Food Technology, Agricultural Product Processing Technology, Agricultural Industry Technology) for a minimum of 2 years,
  • Work experience in engineering practice is evidenced by a statement from each of the institutions where they work,
  • Fill in the Biodata according to the format given.

Length of Study and Load of Classes

  • Length of study is one year or two semesters
  • Total credit hour load is 24 credit hours

#Terms and Conditions for Path 2 :

  • Has a Bachelor of Engineering or Applied Engineering degree from Electrical Engineering, Chemical Engineering, Industrial Engineering, Food Technology/Agricultural Product Technology/Agricultural Industry Technology Study Program and that has had work experience in engineering practice in the field of Electrical Engineering; or Chemical Engineering; or Industrial Engineering; or Agricultural Technology (Food Technology, Agricultural Product Processing Technology, Agricultural Industry Technology) for more than 2 (two) years.
  • or another Bachelor of Engineering; or Bachelor of Science; or a Bachelor of Education in Engineering who has participated in an equalization program with an applied engineering or undergraduate degree in Electrical Engineering, or Chemical Engineering, or Industrial Engineering, or Food Technology / Agricultural Product Technology/Agricultural Industry Technology, and has more than 5 (five) years of engineering work experience.
  • Fill in the Biodata according to the format given.

Length of Study and Classes

  • Length of study is one semester
  • Course material:
  • Code of ethics and the ethics of professional engineers (2 credit hours)
  • Professionalism (2 credit hours)
  • Safety, Health, Work and Environment Safety (2 credit hours)
  • Case Study (4 credit hours)

Seminar and Workshop ( 2 sks)

Time and place of seminar lecture : Lectures are taken place on Thursday – Friday – Saturday, from 18.00 – 22.00 in Kalijudan Campus, Jl. Kalijudan no. 37, Surabaya

Registration : Registration can be done the following ways :

  1. At the Admission Centre in Dinoyo campus, Jl. Dinoyo 42-44, Phone: +62-31-5678478, extension 141
  2. Through on-line website
  3. Through email : psppi@ukwms.ac.id
  4. Pay registration and selection fee of Rp.500.000,-(five-hundred thousands rupiah)

Contact address:

1.Admission Centre at Dinoyo Campus, Jl. Dinoyo 42-44, Surabaya, Phone: +62-031-5678478, ext. :141

2.Faculty of Engineering at Kalijudan Campus, Jl. Kalijudan 37, Surabaya, Phone: +62-031-3893933, ext 103.; Whatsapp contact: +62-85852205048; Email: psppi@ukwms.ac.id.